Pages

Friday, June 30, 2017

Little Firecracker - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Trinita
You must obtain a license to use at PFD HERE
PTU Scrapkit from Jens Sweet Temptations called Little Firecracker
You can purchase this kit at one of her stores HERE
Template #2 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright, word art & layer 11,12,&13

I added borders with noise to my layers
I also added a few more circle layers to my tag

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 2&3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Element 14
Element 15
Element 16
Element 18
Element 22
Element 25
Element 35
Element 40
Element 52
Element 62
Element 64
Element 65
Element 66
Element 72
Element 73
Element 74
Element 93

Merge your layers
Open paper of choice & apply mask if desired

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 30,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Thursday, June 29, 2017

Summer garden For SunBathing - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Lysisange
You must obtain a license to use from PFD HERE
PTU Scrapkit from Cindy's Creative Design called Breezy Summer
Kit can be purchased at S&CO HERE
Mask of choice if desired

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open wreath 2 and place in center
Open wreath 1 and place on top
Using freehand tool draw a circle around frame 1
Add new layer under frame and select all
Open paper 12 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Bird 1
Bling 2
Flowers 1,2,5,6,7,8 7 10
Pots 2

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 29,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Rock On With Music - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of TonyTzanoukakis
You must obtain a license to use from his store HERE
PTU Scrapkit from Sandy's Design purchased HERE
Kit and tube can be purchased as a bundle
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 1 and place in center
Click inside frame with magic wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper 4 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Pewter 1&2
Glass
Ipod 1
Roses 2
Ribbon 1
Cupcake 1
Sparkles 1
Speakers 1
Wire 3

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 29,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Ice Cream In The City - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Spazz
You must obtain a license to use from Hannia's Design HERE
FTU Scrapkit from Irish Princess Designs HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open element 19 and place in center
Click inside frame with magic wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper 9 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Elements 4
Elements 7
Elements 15
Elements 26
Elements 27
Elements 30

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 29,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Monday, June 26, 2017

Show off's from my Waiting Game tutorial

This was the Mystery Tutorial last week at TTL
TY Bev & Sharon for trying my tutorial
I loved your results.
I know it is hard to do a tutorial without a tag



Waiting Game - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zindy Zone
You can purchase her work HERE
FTU Scrapkit by Scraps by Chaos Priestess HERE
Template #1 by Denz Designz HERE
Mask of choice

Ok lets get started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Deleted copyright, all word art, stars & arrow

Add extra noise to the circle

Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on back1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on frame1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add noise with settings of your choice

Click on back2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Add noise to frame 2 with setting of choice

Click on strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your tube to mid - right of tag
Xero Porcelin with settings of choice

Now time to add our elements
I used the following:
Open FrameE103 and place behind tube to the left
Erase any parts of frame showing under tag or move up higher
Open RibbonE101 and place to bottom of tube
Open Leaf101 and place at end of ribbon 101
Open NotepadE1 and place behind leaf 101(resize to your liking)
Open ButterflyE101 and place to right upper corner of frame (resize to your liking)
Open BackdropE1, image mirror and place to right hand side behind all layers
Open ClusterE101 and place in front of Frame E103 (resize to your liking)
Place the cluster near the middle of frame

Merge your layers
Open paper of choice and apply mask of choice
I used 2 different masks on my tag

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 18,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Liberty PTA Clusters

Liberty PTU clusters are now in stores for purchase
Check out Jen's blog for stores
 

Waving the Flag - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
Which you must obtain a license to use HERE
PTU Kit by Purple Dreams Scraps called Independence
You can purchase this kit at PFD HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking

Open blank canvas 700x700
Open element 30 & place in center of tag
Grab the magic tool and click frame
Selections modify expand by 10
Add new layer under frame
Open paper 3 & paste into selections
Select none

Add close-up of tube to each side of frame
Xero Radiance at default settings
Change blend mode to dissolve
On top of tubes write out any saying of choice
Decrease blend mode to around 54 or your liking

Place your tube to middle of frame

Now time to add our elements
I used the following:
Element 2
Element 14
Element 21
Element 22
Element 27
Element 32
Element 34
Element 50

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 26,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Sunday, June 25, 2017

Happy July 4th - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art workof Pinup Toons
Which you must obtain a license to use at CDO here
FTU Scrapkit by Designs by LK HERE
Word Art by ATP  HERE
Mask of choice

Ok Lets get Started:
Open blank 700x700 image
Open frame 3 & paste as new layer
Grab the magic wand and click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 3 & paste into selections
Selection none

Place your tube in front


Now time to add our elements
I used the following:
Bow 2
Cupcake 1
Fireworks
Frame 4
Hat
Heart Flag
Star Cluster
Word Art

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 25,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Waiting Game - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zindy Zone
You can purchase her work HERE
FTU Scrapkit by Scraps by Chaos Priestess HERE
Template #1 by Denz Designz HERE
Mask of choice

Ok lets get started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Deleted copyright, all word art, stars & arrow

Add extra noise to the circle

Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on back1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on frame1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add noise with settings of your choice

Click on back2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Add noise to frame 2 with setting of choice

Click on strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your tube to mid - right of tag
Xero Porcelin with settings of choice

Now time to add our elements
I used the following:
Open FrameE103 and place behind tube to the left
Erase any parts of frame showing under tag or move up higher
Open RibbonE101 and place to bottom of tube
Open Leaf101 and place at end of ribbon 101
Open NotepadE1 and place behind leaf 101(resize to your liking)
Open ButterflyE101 and place to right upper corner of frame (resize to your liking)
Open BackdropE1, image mirror and place to right hand side behind all layers
Open ClusterE101 and place in front of Frame E103 (resize to your liking)
Place the cluster near the middle of frame

Merge your layers
Open paper of choice and apply mask of choice
I used 2 different masks on my tag

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 18,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Saturday, June 24, 2017

Snow White - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Tony Tzanoukakis
Which you must obtain a license to use HERE
PTU Scrapkit by Niqui's Designs called Snow White Exclusive
You can purchase this awesome kit HERE
Kit & tube can be bought as a bundle
Template #1 by Millie HERE
Mask of choice

Ok lets get started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Canvas size 700x700
Delete copyright, stars & word art

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 1
Element 4
Element 5
Element 12
Element 13
Element 14
Element 15
Element 20
Element 22
Element 23
Element 24
Element 25
Element 28

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 24,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Daughterof of Liberty - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
You must obtain a license to use this art HERE
FTU Scrapkit from Bitzy Beez Designz HERE
Template 13  by Creating With Millie HERE
Mask #2 by Dee HERE

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize to your liking
Delete copyright, word art, layers 1&2

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Declaration of Independence
Deco 1
Drink 2
Fireworks 1&2
Wagon 1
Word Art 3
Wreath 1

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 23,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Beach Coconut - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use from HERE
PTU Scrapkit from PinkParadox Productions HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 3 and place in center
Open frame 7 and place on top
Click inside frame with magic wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper 32 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Elements 13
Elements 14
Elements 20
Elements 29
Elements 48
Elements 61
Elements 65
Elements 68
Elements 69
Elements 92
Elements 97
Elements 98
Elements 99
Elements 109
Elements 112
Elements 116

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 24,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

American & Football Girl - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
You must obtain a license to use his art HERE
PTU Scrapkit from Kizzed by Kelz called Perfect American Lady
Kit also purchased - Kit and tube purchased as bundle HERE
Template #226 by Denz Designz HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright, word art, stars & dotted lines

Click on white rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
add border with noise

Click on blue strip1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on 2 red circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on blue circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on red/white strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
add border with noise

Click on blue strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on white circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on red circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on blue circle 1 selections,select all, float,defloat
paste close-up of tube inside circle
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Element 1
Element 2
Element 4
Element 5
Element 6
Element 9
Element 19
Element 23
Element 25
Element 42
Element 44

Merge your layers
Open paper of choice & apply mask if desired

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 24,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Liberated Woman - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use their art HERE
PTU Scrapkit by Jens Sweet Temptations HERE
Template #21 by Rachel Designs HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize to your liking
Delete copyright, word art, layers 7&8

I added extra borders to my layers with noise

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Element 3
Element 16
Element 30
Element 33
Element 35
Element 42
Element 47
Element 62
Element 63
Element 71

Merge your layers
Open paper of choice & apply mask if desired

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 24,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Sunday, June 18, 2017

New Lifestyle - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zindy Zone
You must obtain a license to use at her store HERE
FTU Scrapkit by Bookworm Dezines  HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking and don't forget to drop shadow

Open blank canvas 700x700
Open element 19 and place in center
Using magic wand click inside frame & expand by 15
Add new layer under frame
Open paper of choice and paste into selection
Select none

Place tube at center of tag

Now time to add our elements
I used the following:
Element 1
Element 6
Element 10
Element 21
Element 29
Element 38
Element 43
Element 48
Element 61

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 19,2017 by Rhonda

Saturday, June 17, 2017

Blonde is Beauty - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
You can purchase his work HERE
Matching kit Rieneka Designs called Blonde 2 HERE
Kit and tube can be purchased as a bundle
Template #3 by Millie & Bookworm Dezines HERE
Mask by Brutal Designs  HERE
I used last mask in set

Ok lets get started:
Open template - Shift D to duplicate then close out original
Deleted copyright, dotted lines & word art

Click on layer 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
add border with noise

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
add border with noise

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add border with noise

Click on layer 7&8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
add border with noise

Add close-up of tube inside squares
apply Xero Radiance with settings of choice
apply PhotoEffex Scanlines with settings of choice

Place your tube
apply Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 3
Element 4
Element 5
Element 19
Element 20
Element 21
Element 23
Element 24
Element 29
Element 32
Element 41
Element 44

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 18,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Friday, June 16, 2017

Treasure Forever - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vinegar
You must obtain a license to use at CDO HERE
Matching kit by Ladyhawk Designs  purchased at CDO HERE
Kit and tube match
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 3 & place in center of tag
Click inside frame with magic wand and expand by 10
Add new layer under frame and select all
Open paper 4 and paste into selection
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Element 1
Element 3
Element 5
Element 8
Element 22
Element 25
Element 26
Element 27
Element 28
Element 30
Wordart

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 17,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Antique Roses Clusters - PTU



Jen's newest kit is called Antique Roses and available now in stores for purchase
We also have some matching frames we hope you like
Kit is a beautiful Victorian style with lots of elements and papers
You can find the kit and elements at her stores HERE
 

 
 

Best Day Ever - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Dean Yeagle
You can purchase these tubes at CDO HERE
Matching Scrapkit by Ladyhawk Designs at CDO HERE
Mask of choice

Ok Lets get Started:
Open a blank image 700x700
Open frame 3 and place as a new image
Grab the magik wand and click inside frame
Select modify expand by 10
Open paper 6 and place as a new layer
Selections invert - delete
Move paper under frame

Place your tube
Xero Radiance with settings of choice

Now add any elements of choice
I used the following:
Element 2
Element 10
Element 17
Element 19
Element 21
Element 22
Element 23
Element 26
Wordart

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 17,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Thursday, June 15, 2017

Antique Roses - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
You can find this artist work at PFD HERE
PTU Scrapkit by Jens Sweet Temptations called "Antique Roses"
Will be available in her stores soon HERE
There are also some matching PTU clusters to match kit
Template by Just Like Candy Designs HERE
Mask of choice

Ok lets get started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Delete copyright

Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on upper pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on right dark purple square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on center light purple square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on left pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Vine 4
Element 15
Element 16
Element 17
Element 18
Element 25
Element 29
Element 32
Element 33
Element 34
Element 37
Element 38
Element 42
Element 44
Element 45
Element 46
Element 51
Element 53
Element 55
Element 57
Element 62
Element 64

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 15,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

God Bless The USA - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elisa Chatzoudis
Which you must obtain a license to use at CDO HERE
PTU Kit by Scrappin With Lil Ole me called Remember HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking

Open blank canvas 700x700
Open 82 & place in center of tag
Grab the freehand tool and draw around frame
Add new layer under frame
Open paper 6 & paste into selections

Place your tube

Now time to add our elements
I used the following:
Element 10
Element 12
Element 52
Element 63
Element 70

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 15,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

By The Ocean - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You can purchase their tubes HERE
PTU Scrapkit by PinkParadox Productions called Cake by the Ocean
You can purchase this awesome kit HERE
Template #48 by TwytedT's Playroom HERE
Mask of choice

Ok lets get started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Delete copyright,layers 5 and copy of 5

Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on raster 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper27
selection invert delete
select none delete the original

Click on raster 4 & copy of 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original

Click on raster 8 & copy of 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper35
selection invert delete
select none delete the original

Click on raster 3&10 selections,select all, float,defloat
paste a closeup of tube inside circles
selection invert delete
select none delete the original
apply Xero Radiance with settings of choice

Add noise to frames

Place your tube
apply Xero Radiance to tube again

Now time to add our elements
I used the following:
Element 31
Element 39
Element 42
Element 46
Element 82
Element 85
Element 92
Element 112
Element 129
Element 135
Element 136
Element 139
Element 143
Element 160
Element 163

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 15,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Tuesday, June 13, 2017

USA Beach Party - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
Matching FTU Kit by Pink Paradox HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking

Open blank canvas 700x700
Open frame 23 & place in center of tag
Open frame 21 & place on top a little smaller
Open frame 24 & place on top again a little smaller
Grab the magic wand & click top frame
Selections modify expand by 10
Add new layer under frame
Open paper 20 & paste into selections
Add close-up inside frame
Apply Xero Radiance with settings of choice
Change blend mode to screen
Apply PhotoEffex Scanlines with settings of choice

Place your tube

Now time to add our elements
I used the following:
Element 11
Element 28
Element 58
Element 59
Element 60
Element 61
Element 62
Element 63
Element 65
Element 98
Element 102
Element 110
Element 115
Element 147
Element 158
Element 192
Element 195
Element 197
Element 220
Element 225
Element 226

Merge your layers
Open paper 1 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on January 6,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental