Pages

Wednesday, April 30, 2014

Playful Friends - PTU

 photo playfulfriends.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
Which you must obtain a license to use HERE
PTU Scrap Kit by Chachaz Creations called Ice Hot
You an purchase this awesome kit HERE
Template #536 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading

Filters Used:
Xero Radiance
Filters Unliminted Fine Canvas

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,raster 1&9

Click on layer 2&3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
add new layer and flood fill with solid color of choice
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
add new layer and flood fill with solid color of choice
select none delete the original
apply Filters Unliminted Fine Canvas

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube
apply Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 1
Element 3
Element 4
Element 5
Element 16
Element 17
Element 18
Element 20
Element 22
Element 28
Element 29
Element 35
Element 38
Element 39
Element 43
Element 51

Merge your layers
Open paper 1 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 30,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Live in the Moment - PTU

 photo themoment.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his tubes at his store HERE
PTU Scrap Kit by Mizteeque from  called "Live in the Moment"
You an purchase this awesome kit HERE
Template #446 by Missy HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright,wordart,small square

Click on sqaure 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on square 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on rounded edge square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on rounded edge rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on circles 1,3,5&7 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
add noise with settings fo choice

Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on circle 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on frameback 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click of frames and apply noise with settings of choice
Click on thin rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on circle 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on circle 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Place tube of choice where desired
Repeat the Radiance settings

Now add any other elements of choice
I used the following:
Element 2
Element 5
Element 9
Element 17
Element 18
Element 18
Element 20
Element 21
Element 22
Element 24
Element 27
Element 30
Element 35
Element 36
Element 37
Element 42
Element 44
Element 45

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 30,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, April 28, 2014

Ready for Summer - PTU

 photo readyforsummer.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
You must obtain a license to use his work HERE
PTU Scrap Kit by from Designs by Inzpired Creationz called "Lilly's Garden"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
FTU Cluster Frame by Julie's Jazz Designz HERE
Mask of choice

Ok Lets get Started:
Open cluster frame 1 Shift D to duplicate
Increase canvas size to 700x675
Grab the freehand tool and go around frame
Open paper 13 and place as new layer
Selections invert delete
Move paper under frame

Place tube to right side of tag
Apply Xero Radiance

Now add any other elements to your tag
Here are the elements I used:
Bird 1
Bird 2
Branch 1
Clouds 1
Clouds 2
Kitten
Ladder
Pillows
Sparkle 2

Merge your layers
Open paper 2 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 28,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Fairy Meadow - FTU

 photo fairymeadow.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
FTU Scrapkit by Nicky from Inzpired Creationz called "Enchanted Meadow"
You can download HERE
Template 56 by Flaminsal HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright,wordart and all stars

Click on grey circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on white circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Now lets start adding our elements
Open Scattered Dots - resize 55% & place near bottom of template
Duplicate the dots and mirror
Open Grass 1 - place to bottom of template (you want the dots to show through)
Open clouds - resize 43% & place near top
Duplicate clouds and move down
Open Tree 1 - resize 72% and place to left of template
Open Flowers 2 - resize 32% & place to right behind grass
Duplicate flowers and place where desired
Open Mushrooms 1 - resize 56% and place behind grass
Duplicate mushrooms and place how desired
Open Jar 1 - resize 32% & place to left of template
Open Flowers 1 - resize 40% & place to middle of template
Open Flowers 2 - resize 40% & place to right of template
Open the other mushrooms and place in front of grass along the green
I resized mine different sizes from 25 - 30%
Do the same for the Mushroom Houses
You can duplicate or do whatever you want to decorate
Open Frog - resize 25% and place in center in front of grass
Open butterflies - resize 55% & place in center where desired
Open the other butterflies, resize and place where desired
Open the fairys - resize 55% and place to each side of template

Merge layers

Open sparkles - resize and place where desired
Duplicate as many times as you like

Add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 25,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

A Little Steampunk - PTU

 photo alittlesteampunk.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of The Hunter
You must obtain a license to use at Scraps N Company HERE
PTU Scrap Kit from Inzpired Creationz called "Sweet Steampunk"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Template #450 from Missy HERE
Mask of choice
Leave a thank you when downloading freebies

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 704x700
Delete copyright,wordart & dotted circle

Click on rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on small circle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on frame backs selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original

Click on frames selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original

Click on circle back selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original

Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Antiseptic
Books
Butterfly 1&3
Button 3
Camera
Clock 1&2
Cog 1,2&4
Flowers 1&3
Luggage
Ribbon 3
Roses 1

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 27,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, April 27, 2014

Candy Goth - PTU

 photo candygoth.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pandora Creations
This is a free tube you can receive by liking her on FB HERE
PTU Scrap Kit by Purple Dream Scraps called Candy Goth
You can purchase this awesome kit HERE

Ok Lets get Started:
Open a blank image 700x700
Open frame 3 from kit and place as a new image
Duplicate frame and move down, align as one
Grab the magik wand and click inside each frame
Select modify expand by 5
Open paper 8 from kit and place as a new layer
selections invert - delete
move paper under frames and merge together

Place your main tube to right of frame

Now add any elements of choice
I used the following:
Candle
Candy
Candy 2
Cupcake
Dangler
Goblet
Lipstick
Lollipop 2
NailPolish
Spider
Spider 2
Splatter
Splatter 2

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 27,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Saturday, April 26, 2014

Beautiful Spring Day - PTU

 photo beautifulspringday.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ted Hammond
Which you must obtain a license to use at CDO HERE
PTU Scrap Kit by Chachaz Creations called Flower Spring
You an purchase this awesome kit HERE
Mask of choice

This is a very simple & easy tutorial
Just place your elements where you want them

Open blank 700x700 canvas
Open element 60 and place in center
Grab the magic wand and click inside frame
Selections modify expand by 8
Open paper 5 and paste as new layer
Selections invert delete
Move paper under frame

Place your tube and build around it

Now time to add our elements
I used the following:
Element 1
Element 2
Element 6
Element 11
Element 19
Element 24
Element 28
Element 44
Element 59

Merge your layers
Open paper 6 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 26,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Friday, April 25, 2014

What's the Buzz - PTU

 photo whatsthebuzz.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of KiwiFireStorm
You must obtain a license to use this art TPP HERE
PTU Scrap Kit from Crystals Creations called "Spring Bee"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Template #79 from Drama Bomb Designs HERE

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 85% all layers
Canvas size 700x700
delete copyright

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 8&9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 2
Element 4
Element 6
Element 7
Element 11
Element 13
Element 15
Element 16
Element 17
Element 18
Element 19
Element 20
Element 21
Element 22
Element 24
Element 25
Element 27
Element 28
Element 30

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 25,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, April 20, 2014

Rodeo Babe - FTU

 photo rodeobabe.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
This tube was purchased at PTE which has closed
You must obtain a license to use his art HERE
FTU Scrap Kit by Wicked Princess Scraps HERE
Template by StyleLicious found HERE
Mask #4 by StyleLicious HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas size to 700x700
delete copyright

Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on raster 8 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
add noise and gradient glow

Place your main tube

Now time to add our elements
I used the following:
Barrel
Bird
Bucket
Grass
Logs
Painted Flower
Plant
Saddle Horse
Tree
Wheel

Merge your layers
Open paper 3 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 20,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Purple Desires - PTU

 photo purpledesire.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
Which you must obtain a license to use at Pics for Design HERE
Scrap Kit By Purple Dream Scraps called "Rainbow Girl"
You an purchase this awesome kit HERE
Template #168 by Kristin from Toxic Dezires HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Photo Effex Scanlines

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Image resize 90% all layers
Canvas 700x650
I deleted copyright & right square

Click on left square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on pink top rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on pink bottom rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on blue top rectangle back selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on blue bottom rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on rounded rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Open frame from kit and place above the circle layer
Add close up of tube
Apply Xero Radiance with settings of choice
Apply Photo Effex with default settings

Place your main tube
Xero Radiance with settings of choice

Now add any other elements of choice
I used the following:
Bag
Bottlecap
Bunny
Butterfly
Candle
Candy
Cupcake
Glitter
Martini
Tag

Merge your layers
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 20,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Powder Blue - PTU

 photo powderblue.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_m
Which you must obtain a license to use at Pic for Design HERE
PTU Scrap Kit by Purple Dream Scraps called "Powder Blue"
You an purchase this awesome kit HERE
Template #69 by Millie HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
delete copyright,stars and text layers

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 8 - grab the magik wand and click inside red circle
paste a paper of choice from the kit - I used paper10
selection invert delete
select none

Grab the magic wand again and click on white circle
add noise of choice
select none

Click on layer 9 - grab the magic wand and click inside black circle
add closeup of tube
selection invert delete
select none
add Xero Radiance with settings of choice

Grab the magic wand again and click on white circle
add noise of choice
select none

Click on layer 10 & repeat above instructions

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Bubbles
Cupcake 1&3
Hearts 4
Kitty
Lips 2
Lollipop

Merge your layers
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 20,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

One in a Million - PTU

 photo oneinamillion_aurelie.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
Which you must obtain a license to use at Pics for Design HERE
Scrap Kit By Purple Dream Scraps called "Toxic 2"
You an purchase this awesome kit HERE
Template by Dees'Sign Depot HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x680
I deleted copyright,all stars and black lines

Click on grey oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on black oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on large grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on white square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on large grey strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on white strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on grey strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on white squares - add noise
Click on black squares - add effects - blind

Place close up of tube in the squares
Add Xero Radiance with settings of choice

Click on small strips selections,select all, float,defloat
add new layer and flood fill with color of choice
selection invert delete
select none delete the original

Click on the text and add noise

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Bottle
Cupcake
HeartBomb
Lollipop
Ribbon
Sneakers
Sparkles
Spider
Splat 1&2

Merge your layers
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 20,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Can't Imitate This - PTU

 photo cantimitate_aurelie.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zlata_M
Which you must obtain a license to use at Pics for Design HERE
Scrap Kit By Purple Dreams Scrap called "Michelle"
You an purchase this awesome kit HERE
Template #17 by Kandi from Kandi Kissez
Kandi has since closed this site so use any template of choice

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 710x675
I deleted copyright

Click on left circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
selections invert
selections modify expand by 3
drop down a layer - open paper3 and add as new layer
add noise with settings of choice
select none delete the original

Click on right circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
selections invert
selections modify expand by 3
drop down a layer - open paper2 and add as new layer
add noise with settings of choice
select none delete the original

Click on rectangle back 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original

Click on left black rectangle selections,select all, float,defloat
add close up tube and fit in rectangle
selection invert delete
select none delete the original
Apply Xero Radiance with settings of choice

Click on rectangle frame 3
add noise with settings of choice

Click on dashed line selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on wording selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on rectangle back 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original

Click on right black rectangle selections,select all, float,defloat
add close up tube and fit in rectangle
selection invert delete
select none delete the original
Apply Xero Radiance with settings of choice

Click on rectangle frame 3
add noise with settings of choice

Click on rectangle back 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on rectangle frame 2
add noise with settings of choice
Click on long middle back selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Add noise to  the wordart

Place your main tube behind the wording
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Bottlecap
Bow
Candle
Flower
Heart
Lollipop

Merge your layers
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 20,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Saturday, April 19, 2014

Bunnies Everywhere - FTU

 photo bunnieseverywhere.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
You can purchase his tubes at CDO HERE
FTU kit by Jen from Sweet Temptations HERE
Mask #6 from Chrissy Chaos HERE
Please leave some love when you download..A little thanks goes a long way

This is a very simple and easy tut
Just place your elements where you want them

Ok Lets get Started:
Open blank canvas 700x700
Open frame and place to middle of canvas more to the left
Open balloon - resize 75% and place to top left of frame
Open Painting Bunny - resize 59% and place to bottom far left of frame
Open Cake - resize 57% and place to middle of frame
Place tube to far right of frame
Open Cake Pops - resize 57% and place behind tube to the right
Open Cucpcake 1 - resize 52% and place in front of painting bunny
Open Cupcake 2 - resize 47% and place in front of cupcake 3
Open cupcake 3 - resize 47% and place behind tube in front of cake pops
Open Bunny 4 - resize 37% and place in front of tube beside left foot
Open Bunny 5 - resize 30% and place in front of tube beside right foot
Open Doodle and place where desired

Merge your layers
Open paper 4 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 13,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Moonlit Dreams - PTU

 photo moonlightdreams.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Orkusart
You can purchase these tubes at PFD HERE
PTU Scrap Kit by Mizteeque from  called "Moonlight"
You an purchase this awesome kit HERE
Masks of choice

Plugins Used:
Xero Porcelin

Ok Lets get Started:
Open blank canvas 700x700
Open element 16 - resize and paste as new layer
Click inside frame with magic wand
Selections modify expand by 6
Open paper 1 and paste as new layer
Selections invert delete
Move paper under frame

Place main tube where desired
Apply Xero Porcelin

Now add any other elements of choice
I used the following:
Element 7
Element 8
Element 10
Element 11
Element 12
Element 15
Element 17
Element 26
Element 28
Element 35
Element 36
Element 40
Element 45

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Captivating - PTU

 photo captivating.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use his work HERE
PTU Scrap Kit by from Designs by Sarah called "Captivation"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Mask of choice

Ok Lets get Started:
Open blank 700x700 canvas
Resize elements to your liking
Open frame 1 and place in center
Grab the magic wand and click inside frame
Selections modify expand by 8
Open paper 5 and place as new layer
Selections invert delete
Move paper under frame
Open frame 3 and place to far left under other frame
Image dulpicate and mirror
Grab the magic wand and click inside frames
Selections modify expand by 8
Open paper 11 and place as new layer
Selections invert delete
Move paper under frame

Place tube in center of frame
Apply Xero Radiance & Porcelin

Now add any other elemets to your tag
Here are the elements I used:
Birdcage
Bow 1
Button 2
Flower 1
Greenery
Hearts 2
Lace
Notepaper
Ribbon 1

Merge your layers
Open paper 7 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Queen of Rock - PTU

 photo queenofrock.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Spazzd Art
Which you must obtain a license to use HERE
PTU Scrap Kit by Purple Dream Scraps called Queen Angela
You can purchase this awesome kit HERE
Mask of choice

Ok Lets get Started:
Open a blank image 700x700
Open frame, resize and place in center
Open frame 2 and place on top of other frame
Reize as needed
Grab the magik wand and click top frame
Select modify expand by 8
Open paper 11 from kit and place as a new layer
selections invert - delete
move paper under frame

Place your main tube to right of frame

Now add any elements of choice
I used the following:
Broken Glass
CD
CD Case
Flame
Guitar
Ipod
Keyboard
Microphone
Skull 2
Sparkles 2

Merge your layers
Open paper 2 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Love Bunny - PTU

 photo lovebunny.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Bold Easter"
You an purchase this awesome kit HERE
Template #556 by Millie HERE
Mask #40 from Chrissy Chaos HERE
I used lawn tube that came with PSP to make the grass
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright

Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on raster 2,4&5 selections,select all, float,defloat
add new layer and flood fill with solid color of choice
selection invert delete
select none delete the original

Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on wordart and apply any color of choice
add noise with settings of choice

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Basket
Butterfly 1&2
Bunny on Egg
Candy Box
Cupcake 2
Ears
Egg 2,3,4,5
Flower 1,2,4
Frame 1,2,3,4,5

Merge your layers
Open paper 8 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, April 10, 2014

It's A Garv Thing - FTU

 photo itsagarvthing.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase his tubes at Garv - Girls PSP HERE
FTU Scrap Kit by Soxsational Scraps HERE
Template #34 from Scrap it Studio HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 110%
Canvas size 700x700
Delete copyright

Click on top left circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on bottom right circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on the 3 mats selections,select all, float,defloat
paste a close up of the tube you are using inside mats
selection invert delete
select none delete the original
Apply Xero Radiance with default settings

Click on G layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
I moved my paper around to get the middle portion
selection invert delete
select none delete the original

Do the same for the ARV & It's A Garv Thing layer

Click on 3rd frame selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on 1st frame selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on 2nd frame and apply noise with settings of choice
Place your main tube in center
apply Xero Radiance with settings of choice

Open toxic button - resize 35% and place under It's A Garv Thing wordart
Open toxicskull1 - resize 35% and place above ARV wordart - rotate slightly to the right
Open toxicbeads and place to bottom of tag, line it up with big circle
Open toxic butterfly2 - resize 30% - place on top of G wordart

Merge your layers
Open paper 10 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 30,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Love Never Fails - PTU

 photo loveneverfails.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Sonia Roji
You can purchase her tubes at CDO HERE
PTU Scrap Kit by Mizteeque called "Love Never Fails"
You an purchase this awesome kit HERE
Template #544 by Millie HERE
Gems Mask #22 HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright

Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Place main tube

Now add any other elements of choice
I used the following:
Element 1
Element 3
Element 8
Element 10
Element 14
Element 22
Element 24
Element 32
Element 35
Element 38
Element 39
Element 40
Element 47
Element 49

Merge your layers
Open paper 10 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 10,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Friday, April 4, 2014

It's a Doggy Easter - PTU

 photo itsadoogyeaster.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Maryline Cazenave
Which you must obtain a license to use at CDO HERE
PTU Scrap Kit by Purple Dream Scraps called Easter Bunny
You can purchase this awesome kit HERE
Mask of choice

Ok Lets get Started:
Open a blank image 700x700
Open frame from kit and place as a new image
Grab the magic wand and click inside frame
Select modify expand by 8
Open paper 4 from kit and place as a new layer
selections invert - delete
move paper under frame

Place your main tube to right of frame

Now add any elements of choice
I used the following:
Bow
Bubbles
Chick 2
Chicks
Cupcake
Duck
Egg
Egg 3
Eggs
Flower
Flowers
Sparkle
Sparkles

Merge your layers
Open paper 12 from kit and place as a new layer
Open mask and apply to tag

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Bunny Land - PTU

 photo bunnyland.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Very Many
Which you must obtain a license to use HERE
PTU Scrap Kit by Chachaz Creations called Easter Dreams
You an purchase this awesome kit HERE
Template #169 by HorsePlay Pastures HERE
Mask #3 by HorsePlay Pastures HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright and raster 4

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 5
Element 12
Element 13
Element 19
Element 25
Element 32
Element 34
Element 36
Element 48
Element 50
Element 59
Element 70

Merge your layers
Open paper 3 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png