Pages

Wednesday, October 30, 2013

Santas Gift Babe - PTU

 
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ismael Rac
You can purchase his tubes HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Christmas Ribbon"
You can purchase this kit on her blog HERE
Template #19 by Wendy HERE
Mask 56 from Rosesblack HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Xero Fritillary
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x7000
I deleted copyright & dotted lines
 
Click on frame background selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on circle frame background selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on frame selections,select all, float,defloat
add new layer and flood fill with color of choice
add Xero Fritillary with settings of choice
select none delete the original
 
Place your main tube
Apply Xero radiance with settings of choice
 
Now add any other elements of choice
Bells
Box
Candycane
Cat Ornament
Cup
House
Ornament 1&2
Reindeer
Stocking
 
Merge your layers
Apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 23,2012 by Rhonda photo rhondaSiggyApr2013.png

Letter to the North Pole - FTU

 
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use at his store HERE
This tube was purchased at MPT which has closed
FTU Scrap Kit by Vaybs called "To The North Pole"
You an download this awesome kit HERE
Chrsitmas Mask #11 by Vaybs HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Kneeling tube works best for this tut
Ok Lets get Started:
Open a white blank canvas 700x700
Open element 25 from kit and place as a new layer
Grab the magik wand and click inside frame
Selections Modify expand by 10
Open paper 10 from kit and place as a new layer
Selections - invert - delete
Move layer under frame
Open element 13 and place to the top left of frame
Open element 35 - place to right of frame
Open tube and place to left of frame
Open element 41 and resize 42% - place behind tube with address showing
Open element 23 resize 45% - move beside the letter
Open element 6 and place to far right of tree
Open element 22 and resize 42% - place beside other present
Open element 40 resize 42% and place in front of tube
Hide the white background and merge layers visible
Open paper 6 from kit and place under tag
Open mask and apply
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 9,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

All Dreams - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work Ismael Rac
You can purchase this tube at his store HERE
FTU kit by Mizteeque HERE
Template #6 by Tracy HERE
Look to the right and you will see the holiday temp downloads
Wordart by Mizteeque HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Filters Unlimited Textures
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x660
Delete copyright layer and wordart
 
Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on shape 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
apply texture of choice
 
Click on shape 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Add closeup of tube to the shape
apply Xero Radiance with settings of choice
 
Place your main tube
Add Xero Radiance again
 
Now time to add our elements
I used the following:
Any 3 christmas balls of choice
Element 28
Element 33
Element 41
Element 51
 
Add the wordart with noise of choice
Merge the layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 14, 2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Santa's Naughty Little Helper - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
This tube was a prepaid which was gifted to me by a wonderful friend
You can purchase her tubes HERE
Limited FTU Scrap Kit by Jen from Sweets Temptations called "12 Days of Christmas 2012"
This kit will be available on her blog  HERE
Template by Pamela from Redefined Designs HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 86%
Canvas size 700x7000
I deleted copyright & new layer
 
Click on new layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

I added a border of 3 with glitter 4 & noise
Click on background selections,select all, float,defloat
paste a paper of choice from the kit - I used paper33
selection invert delete
select none delete the original
I added a border of 3 with glitter 6 & noise
 
Click on new layers 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used glitter 6
selection invert delete
select none delete the original
add noise with settings of choice
 
Click on new layers 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper31
selection invert delete
select none delete the original
 
Click on new layers 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Now add closeup of tube in each frame
Apply Xero Radiance with settings of choice
 
Click on wordart selections,select all, float,defloat
add a new layer and  flood fill with gradient of choice
add noise with settings of choice
select none delete the original
 
Click on new layer 7 selections,select all, float,defloat
add a new layer & flood fill with white
select none delete the original
 
Place your main tube
Apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bow 1
Candy Ornament 1&5
Lights
Lollipop 2
Note
Ornament 5&6
Tinsel
Wreath
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 10,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Spearmint Christmas - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Suzanne Woolcott
Not sure if you can still purchase her tubes but her store is HERE
FTU Scrap Kit by MizTeeque called "Spearmint Christmas" HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Open a blank 700x700 image
Open element 28 - paste as a new layer
Resize 88% - rotate 90 degrees to the right
Grab the selection tool and draw a rectangle around the frame
Open paper 12 - Selections invert delete
Move paper under frame
Open element 5 - resize - place to right of frame
Open element 36 - resize small enough to place on tree - place as many as desired
Open element 23 - resize and place to top left of frame
Open element 43 - resize - place to bottom left of frame
Open element 41 - place beside heart
Open element 21 - resize and place to top left of frame
Open element 15 - resize - place to bottom left of frame on top of bells
Open element 29 - resize - place behind frame - duplicate
Move duplicate bow to the top - Using the eraser tool erase the parts you don't want showing

Place your main tube to right of frame
Apply Xero radiance with settings of choice

Merge your layers
Open paper  and apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 1,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

This Way to Christmas - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
Which you must obtain a license to use at CDO HERE
This tube was bought at CILM which has closed
Limited FTU Scrap Kit by Jen from Sweet Temptations called "12 Days of Christmas 2012"
You an download this awesome kit HERE
Template #9 from Carrie's Concoctions HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 84% all layers checked
Canvas size 700x675
delete copyright & layer SC1
 
Click on SR2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on SC2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on large circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper32
selection invert delete
select none delete the original
I also added a border around the circle
 
Click on SR1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bunny N Gift
Gift Stack
Gifts 3,4 & 6
House 1
Sign
Toy Bag
Tree
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 7, 2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Just a Little Present - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
This tube was a gift I got from PFD
You can purchase her work HERE
FTU Scrap Kit by Jen from Sweets Temptations called "Crazy Christmas"
You an download this awesome kit HERE
Template #24 by Rosa HERE
Christmas mask 1 from Essex Girl HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
I deleted copyright,wordart,layers 6,7,8&9
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
fill with a solid color of choice
selection invert delete
select none delete the original
 
Add noise to the snowflakes
 
Click on layer 4 selections,select all, float,defloat
add close-up of tube you are using
selection invert delete
select none delete the original
 
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Place your main tube
apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bag 2
Bear 1
Candy 1
CandyCane 1
Gift
Hat Kitty
Ornaments 3&4
Sign
Tree
 
Merge your layers
Open paper 5 and paste as new ;ayer
Open mask in psp and apply to tag
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 3,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Christmas Joy - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
This tube was purchased at PTE which has now closed
You can now find Garvey's work at his own store HERE
FTU Scrap Kit By Teresa from  Topcats Tagz called "Christmas Joy"
You an find this awesome kit HERE
Please remember to say Thank You when downloading
Mask of choice

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open a blank image 700x700
Resize elements to your liking
Dropshadow of choice
Open element 48 and place to left of tag
Grab the magik wand & click inside wreath
Selection modify expand by 10
Open paper 2 & paste as a new layer - select none
Move paper under wreath
Effects Texture Blinds with settings of choice
Open element 24 and place inside wreath
Open element 1 and place to right of tag
You don't want the wreath to show behind the tree
Open elements 15&16 and place in front of tree
Open element 18 and place in front of presents
Open element 30 and place to left of tag
Place your main tube infron of wreath
Apply Xero Radiance with settings of choice
Open element 23 and place in front of tube

Merge your layers
Open mask and apply to tag
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 23,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Spreading Garv Cheer - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his work at his store HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Spreading Christmas Cheer"
You an purchase this awesome kit HERE
Template #184 by Tami HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Photo Effex Scanlines
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 88% all layers
Canvas size 700x700
 
Click on raster 9 & copy of raster 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on raster 4 & copy of raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on raster 5 selections,select all, float,defloat
I added notebook element
selection invert delete
select none delete the original
 
Click on raster 3 & copy of raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on raster 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on raster 6 & copy of raster 6 selections,select all, float,defloat
add close-up of tube you are using
selection invert delete
select none delete the original
apply Xero Radiance with settings of choice
 
Add gradient to frames & apply noise
 
Place your main tube
Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bag 2
Bow 1
Bulb Box
Card
Gifts
Ornaments
Pup
Santa
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 1,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Christmas Train - PTU

 
Tube of choice: I'm using the wonderful art work of Alex Prihodko
Which you must obtain a license to use at Pic for Design HERE
PTU Scrap Kit by Jen from Sweet Temptations called "No Peekin"
You an purchase this awesome kit HERE
Template #106 by Rosey from Rosey's Place HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,white&purple right circle
 
Click on green oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on blue oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on purple left circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on white left circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bells
Candle1
Candycanes
Cardinal
Gifts
Gifts1
House
Train
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 26, 2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Dear Santa - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
You can purchase these tubes at CDO HERE
PTU Scrap Kit by Jen from Sweets Temptations called "All Spruced Up"
You an purchase this awesome kit HERE
Template #165 from Punky Butts HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright, all stars layers, layers 9,10,11&12
 
I added a solid color & noise to all the frames
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on raster 3&5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on raster 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Place your main tube
apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Candycane 1
Gift
Letter to Santa
Lights
Ornament 3&5
Pup
Puppy N Box
Santa Box
Tree 1
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 25,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

North Pole Cutie - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
You can purchase her tubes at PFD HERE
FTU Scrap Kit by Vesta called "Pink Ice Xmas" HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Open a blank 700x700 image
Open cluster frame 1 - paste as a new layer
Grab the freehand tool and draw around 1 frame at a time
Open closeup tube and place inside each frame
Selections invert delete
Apply Xero Radiance with settings of choice
Open element 2 - resize - place at top left of frame
Open element 29 - resize - place at bottom left of frame
Duplicate this element and move behind the frame
Grab the eraser tool and erase all parts showing on top of frame
You want the candle to show behind the frame
Open element 30 - resize and place to bottom right of frame
Open element 37 - resize - place in front of frame to left
Open element 31 - resize - place beside element 37 more to the right
Place your main tube to right of frame
Apply Xero radiance with settings of choice
Merge your layers
Open paper 10 and apply mask of choice
Merge group
Open sparkles 2 - apply on top of mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 17,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Gift for Me - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Gene Gonzales
I'm not sure where or if he is selling at this time
This tube was bought at CILM which is now closed
PTU Scrap Kit by Jen from Sweet Temptations - It is her 12 Days of Christmas in 2009
You an purchase this awesome kit HERE
Template #1 by Cupcake Sprinkles from the Template Bundle Pack
You can get this HERE
Templates are located on the right hand side of page
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Photo Effex Scanlines
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 130% all layers checked
Canvas size 700x675
delete copyright & staples
 
On all rectangle frames add color of choice & noise
 
Click on circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper34
selection invert delete
select none delete the original
add noise
 
Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original
 
Click on rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper30
selection invert delete
select none delete the original
 
Click on rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on rectangle 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper36
selection invert delete
select none delete the original
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Card 12
Card 2
Bear 12
Candle 5
Sack 1
Tree 11
Gift 5
Gift 6
Holly Bell 2
Sleigh 1
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 18, 2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Winter Wonderland - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
You can purchase his tubes at his store HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Frosty"
You an purchase this awesome kit HERE
Template by Vix HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x675
I deleted copyright, frames, darker rectangle & diamonds
 
Click on dotted circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Leave buttons as they are and dropshadow
Leave wordart as is
 
Click on light blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Add frame one to rectangle
 
Click on dark cloud rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Add frame 2
 
Click on light cloud rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Add frame 2 again
 
Place your main tube
Apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Flower 3
Skater Light
Snow
Snowflake 2
Snowman Light
Tree Light
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 6,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sweet Sugar Holiday - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was a Christmas gift when he was at MPT
You can purchase his tubes HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Stocking Stuffers"
You an purchase this awesome kit HERE
Template #42 by Kandi from Kandi Kissez
You can get this HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x670
I deleted copyright,pink square & snowflake
 
Click on small black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on top pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
 
Click on small pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on dotted rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on bottom pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on large black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on small pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on dotted rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on pink frame selections,select all, float,defloat
add close-up of tube you are using
selection invert delete
select none delete the original
Apply Xero Radiance with setings of choice
 
Click on long pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Place your main tube
Apply Xero radiance with settings of choice
 
Click on frames & add noise with settings of choice
Add noise to word art
 
Now add any other elements of choice
I used the following:
Bell1
Bird
Candle1
Candycane1
Letter1
Lights
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 23,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

So Damn Sexy - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
You can purchase her tubes at her store HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Bad Girl Kit 2"
You an purchase this awesome kit at her store HERE
Template #400 by Millie HERE
 
Plugins Used:
Xero Radiance
Xero Fritillary
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 90%
Canvas size 700x700
Delete copyright & layer 4
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper45
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper58
selection invert delete
select none delete the original
 
Click on layers 6&7 selections,select all, float,defloat
add new layer & flood fill with color of choice
select none delete the original
 
Click on layer 8 selections,select all, float,defloat
add new layer & flood fill with gradient of choice
select none delete the original
add noise with settings of choice
 
Place your main tube
Add Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 3
Element 4
Element 11
Element 17
Element 19
Element 20
Element 45
Element 48
Element 49
Element 67
Element 73
Element 87
Element 88
Element 92
Element 99
Element 108
Element 111
Element 135
 
Merge your layers
Open elements 94&95 and place on each side
apply Xero Fritillary with settings of choice
Merge the two together
Duplicate and mirror
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 30,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, October 27, 2013

Wake me on Halloween - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Maryline Cazenave
You must obtain a license to use this art at CDO HERE
FTU Scrapkit from Designs by Sarah
You can download this awesome kit by liking her page on facebook  HERE
 
Resize your elements to your liking
 
Ok Lets get Started:
Open blank canvas 700x700
Open frame 2 and place as new layer
Click inside frame with magic wand
Selections modify expand by 5
Open paper 10 and paste as new layer
Selections invert delete
Move paper under frame
 
Place your main tube where desired
 
Now add any other elements you want to your tag
I used:
Flower 2
Flower 3
Flower 4
Trick or Treat Lights
Print 1&2
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Friday, October 25, 2013

Indian Summer - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Caron Vinson
You can purchas these tubes at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Indian Summer"
You can purchase this awesome kit at her store HERE
Template #8 by Lucky Star Scraps HERE
Mask #94 by Rosesblack HERE
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright,mask & layers 9-11
 
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
 
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper28
selection invert delete
select none delete the original
 
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper31
selection invert delete
select none delete the original
 
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
 
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
 
Click on layer 12 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original
 
Click on layer 13 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper24
selection invert delete
select none delete the original
 
Click on layer 14 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper32
selection invert delete
select none delete the original
 
Click on layer 15 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper26
selection invert delete
select none delete the original
 
Click on layer 16 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper30
selection invert delete
select none delete the original
 
Click on layer 17 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original
 
Place your main tube
 
Now time to add our elements
I used the following:
Element 13
Element 39
Element 49
Element 51
Element 54
Element 55
Element 63
Element 68
Element 84
Element 89
Element 95
Element 96
Element 97
Element 100
Element 104
 
Merge your layers
Open paper 8 & apply mask
I added a weave effect also
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 25,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Pilgrim Harvest - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his tubes at his own store HERE
FTU kit by Jen from Sweet Temptations called "Harvest Special" HERE
Mask of choice
Please leave some love when you download
 
This is a very simple and easy tut
Just place your elements where you want them
 
Ok Lets get Started:
Open blank canvas 700x700
Place your main tube where you want it to be on tag
Add elements around the tube
Here are the ones I used:
Branch
Crow 1
Gazebo
Harvest
Owl
Pumpkins
Scarecrow
Squirrel
Turkey
 
Merge your layers and apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 8,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

What's Cooking - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
You can purchase his work at his store HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Pumpkin Spice"
You an purchase this awesome kit HERE
Thanksgiving Template #111 by Leah HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Filters Unlimited
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize 110% all layers
Canvas size 700x675
delete top 3 layers

add noise to all the frame layers
 
Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on rectangle selections,select all, float,defloat
add a brown color
apply Filters Unlimited Fine Canvas
select none delete the original
 
Click on square 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on square 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on square 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on square 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Place your main tube in the center
Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bow
Branch
Cake
Candle
Cup
Cupcake 1&3
Jar
Pies
Turkey
 
Merge your layers
Apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 18,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, October 24, 2013

Ghost Fright - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Caron Vinson
You can find her art at CDO HERE
PTU Scrap Kit by Jen from Sweet Temptations called Midnight Fright
You can purchase this kit at her blog HERE
Mask of choice
 
Ok Lets get Started:
Open blank canvas 700x700
Open elements of choice and place where desired
I used the following:
Bad to the Bone
Bag
Bats
Bottle
Coffin
Flowers
Ghost 1
Grave
Haunted House
Owl
Kitty
Tombstone
Web
Witch Cupcake
 
Place tube you are using where desired
 
Merge your layers
Open paper 10 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 24,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, October 22, 2013

Steampunk 2 - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of The Hunter
You can purchase his tubes at SATC HERE
PTU Scrap Kit by Mizteeque from  called "Steampunk 2"
You an purchase this awesome kit HERE
Template #24 by Flaminsal HERE
Mask by Chaos HERE
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright & wordart
 
Click on large grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on blue rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on blue rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on large blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on black rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on small grey rectangles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on frames selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Place tube of choice where desired
Now add any other elements of choice

I used the following:
Element 1
Element 3
Element 4
Element 6
Element 11
Element 13
Element 15
Element 17
Element 18
Element 22
Element 24
Element 25
Element 26
Element 28
Element 29
Element 31
 
Merge your layers
Open paper 1 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, October 17, 2013

Show off from Skia

 
 
Skia sent me her result from one of my tutorials
TY so much sweetie. I love the tag photo rhondaSiggyApr2013.png

Be my Trick - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Misticheskaya
You can purchase this artists tubes at SATC HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Spookyween"
You an purchase this awesome kit at her store HERE
Halloween Template #2 by TwyztedT's Playroom HERE
Mask #400 by Vix  HERE
Font is Goombella  HERE
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 87% all layers
Canvas 700x700
Delete copyright
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper32
selection invert delete
select none delete the original
 
Click on raster 5 & copy of raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper31
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper23
selection invert delete
select none delete the original
 
Click on raster 6 using the magic wand to click inside each individual square
add new layer
I used elements 93&123 and pasted into image
delete original
 
Merge the wordart layers
I left all the shadowed layers as they were
 
Place your main tube
apply Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 14
Element 18
Element 20
Element 27
Element 35
Element 51
Element 53
Element 54
Element 63
Element 70
Element 77
Element 88
Element 94
Element 95
Element 96
Element 107
Element 114
Element 126

Merge your layers
Open paper 16 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 17,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Halloween with the Chicks

The chicks are having some Halloween fun over at the forum this month.
We are hosting some fun games, exciting challenges & free prizes.
If you are not a member and would like to join in on the fun we
would love to see you join us.
You can find the link to the forum to the right of my blog photo rhondaSiggyApr2013.png

Stirring Some Magic - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Tony Tzanoukakis
You must obtain a license to use his art HERE
PTU Scrap Kit from Designs by Sarah called "Halloween Hijinks"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Template #10 from Dangerous Delicious Designz HERE
Font used is Auld Magic HERE
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,wordart & star
 
Click on green square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on large purple circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on blue & green strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on small purple circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on blue circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on orange square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on dashed square selections,select all, float,defloat
add new layer & flood fill with color of choice
select none delete the original
 
Place your main tube
 
Now time to add our elements
I used the following:
Bats
Black Cat
Buttons 1&2
Couldron Flames
Moon
Potion 1,2&3
Print 1&2
Ribbon 2
Skull Candles
Tomdstone
Web
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 17,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png