Pages

Friday, August 30, 2013

Too Cute Too Spook - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
You can purchas these tubes at her store HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Ghastly Dreams"
You an purchase this awesome kit at her store HERE
Template #18 from Cakes HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 80% all layers
Canvas size 700x700
Delete copyright,wordart & star
 
Click on raster 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper47
selection invert delete
select none delete the original
 
Click on raster 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper46
selection invert delete
select none delete the original
 
Click on raster 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper48
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
 
Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper40
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper28
selection invert delete
select none delete the original
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
add noise with settings of choice
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper44
selection invert delete
select none delete the original
 
Place your main tube
apply Xero Radiance
 
Now time to add our elements
I used the following:
Element 10
Element 40
Element 42
Element 59
Element 66
Element 89
Element 90
Element 93
Element 94
Element 95
Element 100
Element 103
Element 110
Element 111
Element 123
 
Merge your layers
Open paper 7 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 30, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Snags from Urban Glam kit

 
 
Tasha from Tasha's Playground has an awesome kit for sale at Designer Scraps called Urban Glam
You can purchase this kit from the store HERE
I used a tube from Diana Gali which can be purchased at SATC HERE
I made some snags from the kit to share with you
You can download them HERE photo rhondaSiggyApr2013.png

Picture of Fall - PTU

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jessica Dougherty
This tube was purchased at CILM which has closed
You can purchase her art at CDO HERE
PTU Scrap Kit by Cindy from Chichi Designz's called "Autumn Calling"
You an purchase this awesome kit HERE
 
Filters Used:
Xero Radiance
PhotoEffex Scanlines
 
Ok Lets get Started:
Open blank 700x700 canvas
Open frame and rotate 90 degrees to left
Grab the magic wand and click inside frame
Selections modify expand by 10
Open paper 2 and paste as new layer
Selections invert delete
Move paper under frame
Apply PhotoEffex with settings of choice
 
Place your main tube where desired
apply Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bird
Brush Sparkle
Fence
Flower 1
Flower Branch
Flower Leaves
Leaves
Mushrooms
Pumpkin
Squirrel
Sparkles
Sunflower
Tree
Walnuts
Web
 
Merge layers
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 30,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Goth Heart - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Spazzd Art
You can purchase these tubes HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Goth Heart"
You an purchase this awesome kit HERE
Template by Nicky HERE
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 90% with all layers checked
Canvas 700x700
Delete copyright,wordart,white & black strips & dots
 
Click on red squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on white strips 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
 
Click on grey squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on middle strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on large circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Place your main tube
 
Now time to add our elements
I used the following:
Branch 2&3
Cardboard 1
Door
Flower 1&2
Flowers 1,2&3
Grass & Skulls
Grass
Grave
Grunge Smear 1
Vials
WA 3
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 30,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, August 29, 2013

Nerdy Girl - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ted Hammond
This tube was purchased at CILM which has closed
You must obtain a license to use his art at CDO HERE
PTU Scrap Kit from Designs by Sarah called "Nerdy Cutie"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
 
Plugins Used:
Xero Radiance
 
Resize your elements to your liking
Ok Lets get Started:
Open blank canvas 700x700
Open frame 1 resize & position in center
Grab the magic wand and click inside frame
Selections modify expand by 6
Open paper 3 and place under frame
Selections invert delete
 
Place your main tube to right of frame
Apply Xero Radiance with settings of choice
 
Now add any other elements you want to your tag
I used:
Books
Button 1
Camera
Flower 4
Heart
Phone
String 2
 
Merge your layers
Open backdrop 2 duplicate & mirror
Open Print 1&3 and apply to backdrop
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, August 27, 2013

Memories of Fall Days - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jennifer Janesko
This tube was purchased at CILM which has cloed
You must obtain a license to use her art now at CDO HERE
PTU Scrap Kit by Devilish Dezines Scraps called "Memories"
You an purchase this awesome kit at Designer Scraps HERE
Mask #23 by Gems Taggin Scraps HERE
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open blank canvas 700x700
Open frame 1 & place in center - resize to liking
Grab the magic wand & click inside the frame
Selections modify expand by 5
Open paper 3 and paste as new layer
Selections Invert Delete
Move paper under frame
 
Place your main tube where you desire
 
Now add any other elements you want to your tag
I used:
Element 1
Element 2
Element 13
Element 23
Element 37
Element 38
Element 44
Element 46
Element 49
Element 50
 
Merge your layers
Open paper 2 and apply mask
Apply Filters Unlimited Texture
Add new layer and flood fill with color of choice
Apply another mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Circus Time - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
No tube neede for this tutorial
PTU Scrap Kit by Jen from Sweet Temptations called "A Family Af-fair"
You an purchase this awesome kit HERE
Bottom Template by Jus Graphix HERE
Mask #8 by Chrissy Chaos HERE
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 90%
Canvas size 700x700
delete copyright, layers 8,9,& 10
 
Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Now time to add our elements
I used the following:
Ball Toss
Balloon Darts
Balloon
Clown 2&4
Duck Shot
Elephant 4
Popcorn
Ticket Booth
Train
 
Merge your layers
Open paper 4 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, August 26, 2013

Autumn Goddess - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Very Many
You can purchas these tubes at PFD HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Autumn Harvest"
You an purchase this awesome kit at her store HERE
Template #53 from Flaminsal HERE
Mask #1 by Millie HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright & wordart
 
Click on pink rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on pink rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original
 
Click on blue rectangle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper23
selection invert delete
select none delete the original
 
Click on white circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on circle frame selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
add noise with settings of choice
 
Click on pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
 
Click on cerise rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on blue rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on rectangle frame selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Place your main tube
apply Xero Radiance
 
Now time to add our elements
I used the following:
Element 1
Element 7
Element 8
Element 19
Element 22
Element 26
Element 29
Element 31
Element 38
Element 63
Element 71
Element 73
Element 91
Element 100
Element 119
Element 128

Merge your layers
Open paper 10 & apply mask
I added a weave effect to my mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 26, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Rustle in the Wind - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Anna Marine
You can purchase her work at CDO HERE
FTU Scrap Kit By Nicky from Inzpired Creationz called "Blessed Be" HERE
Mask #10 by Weescotslass Creations HERE
Links are on right hand side of blog
Please leave a thank you when downloading freebies
 
Ok Lets get Started:
This is a very quick and easy tutroial
Open a blank image 700x700
Open frame 2 resize 88% & place in center
Grab freehand tool and draw around frame
Open paper 4 place as new layer
selections invert delete
move paper under frame
Open ivy 1 resize 70% and place on top of frame in center
Open wind 1&2 resize 70% and place and each side of frame
Open lamp post and place to right of frame
Open house and post to left of frame
Place tube you are using in center of frame
Open jars resize 42% place to bottom right of frame near center
Open owl resize 32% place beside jars
Open bottle 2 resize 65% place behind owl to the right
Open frog resize 42% place to left of tag

Merge layers
Open paper 3 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 17,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Garvey Girl Rocks - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase his work at his store HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Rock Hard"
You an purchase this awesome kit from Pimp My Tags W/Scraps Store HERE
FTU Cluster Frame from PSPers Delite  HERE
 
Ok Lets get Started:
Open blank canvas 700x700
Open cluster frame shift D to duplicate & close original
Place as new layer in center of canvas
Open frame 1 resize and place behind cluster frame
Grab the magic wand and click inside cluster
Selections modify expand by 8
Open paper 4 & paste into selections
Move paper under frame

Place your main tube
Xero Radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bow 1
Drums
Drumsticks
Halftone 1
Kiss 2
Lightray
Sparkles 3
Splatter 2
VIP Pass
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 24,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Saturday, August 24, 2013

More show off's from Bobbie

 
 photo rhondaSiggyApr2013.png

Wicked Ways - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jessica Dougherty
I purchased this tube from CILM which has now closed
You must obtain a license to use these tubes at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Bite Me"
You an purchase this awesome kit at her store HERE
FTU Cluster to match this kit by Sweet Temptations HERE
Mask #1 by Dangerously Delicious Designz HERE
 
Ok Lets get Started:
Open blank canvas 700x700
Open cluster frame & paste as new layer
Grab freehand tool & draw around frame
Open paper 22 & paste as new layer
Selections invert delete
Move paper under frame

Place your main tube inside frame
Add Xero Radiance with settings of choice
 
Now lets add other elements to our tag
I used:
Element 26
Element 47
Element 58
Element 102
 
Merge layers
Open paper 26 and apply mask
Add Weave Effect to mask layer
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 24,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, August 22, 2013

Show Off's

 
Several friends from The Creative Chicks forum made tags using my tuts
Thank you Bobbie & Fruity!!!!!!!!!!!!!!!!
 
 
 photo rhondaSiggyApr2013.png

School Girl - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ninaste
You can purchase this tube at SATC HERE
PTU Scrap Kit by Distrubed Scraps called Naughty Schoolgirl
You can purchase this kit at SATC HERE
Template #359 by Missy HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Penta Drag
PhotEffex Scanlines
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright & wordart
 
Click on oval layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on oval 3 layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on glittered circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on circle layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on frame background selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on frame center selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on frame backgrounds left & right selections,select all, float,defloat
paste closeup of tube inside frame
apply Xero radinace with setting of choice
select none delete the original
 
Leave glittered frames as is
 
Place your main tube in center
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 28
Element 31
Element 32
Element 33
Element 38
Element 41
Element 43
Element 50
Element 52
Element 56
Element 60
Element 63
Element 68
Element 73
Element 80
Element 107
Element 122
Element 126
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Popping Out - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Amy Matthews
You can purchase her art at CDO HERE
PTU Scrap Kit by Cindy from Chichi Designz's called "IB Anna Marine 7-2"
You an purchase this awesome kit HERE
Sparkle Mask from Farm Fresh Designs HERE
 
Ok Lets get Started:
Open blank 700x700 canvas
Open arch & place in center
Open scenery and place at bottom of arch
Grab the freehand tool & draw around arch& scenery
Open paper 4 and paste as new layer
Selections invert delete
Move paper under arch & scenery
 
Place your main tube where desired
 
Now time to add our elements
I used the following:
Branch
Butterflies 2
Clouds
Fog
Lantern
Roses
 
Merge layers
Open paper 3 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, August 18, 2013

Halloween Torture - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
I bought this tube from MPT which has now closed
You can purchase Elias tubes at his own store HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Haunted Fun"
You can download this awesome kit HERE
Torture Template by Dee from Dees'Sign Depot HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
I deleted copyright, dotted frames & word overlay
 
Click on orange circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on purple square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on left & right orange circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on white strip selections,select all, float,defloat
add a new layer and flood fill with color of choice
Add noise with setting of choice
select none delete the original
 
Click on white rims selections,select all, float,defloat
add a new layer and flood fill with color of choice
Add noise with setting of choice
select none delete the original
 
Click on blue strip selections,select all, float,defloat
add a new layer and flood fill with color of choice
Add noise with setting of choice
select none delete the original
 
Click on the green rectangles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Add close-up tubes in the left & right rectangles
apply Xero Radiance with settings of choice
 
Place your main tube in the center
Xero radiance with settings of choice
 
Recolor your wordart as desired
 
Now add any other elements of choice
I used the following:
Bat 3
Candle 1
Cat 2
Mice
Sparkles 1
Spider 2
Web 1
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 15,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Ghouls Night Out - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
No artist tube needed
FTU Scrap Kit by Jen from Sweet Temptations
You an download this awesome kit HERE
TY Jen for shring your awesome kits!!!!
Ghouls Template from Dees'Sign Depot HERE
Don't forget to leave a thank you when downloading
Ok Lets get Started:

Open template - Shift D to duplicate then close out original
Canvas size 700x635
Delete copyright, dotted frame, green strip and all stars layers
 
Let's start with the wordart first
Click on the black wordart layers
Seletions modify expand by 2
add new layer under the wordart
flood fill with white
merge the layers
merge all the wordart layers into 1 layer
 
Click on orange oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on green circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on blue circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on purple circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on orange square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Now we are going to add our elements
These will all be under the wordart layer
Resize elements to your liking
I moved the wordart down just a tad
Open pumpkins - position to far right of tag
Open grim and mirror - position beside the pumpkin
Open frankie -position to far left of tag
Open candle 1 -position in front of frankie
Open skelton kitty -position to right of candle
Open spider -position on top of grim ax
Open winged skull -position to right of tag above pumpkin
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 7,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Trick or Treat - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Eugene Rzhevskii
You can purchase his tubes at PFD HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Spell Binding"
You an purchase this awesome kit HERE
Template #87 by Rose HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
PhotoEffex Scanlines
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x650
I deleted copyright & pink tones
 
Click on blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on bottom & top purple rectangles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on the green circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
 
Click on orange rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on black squares selections,select all, float,defloat
add closeup of tube you are using
selections invert delete
Add Xero Radiance with settings of choice
Add PhotoEffex Scanlines with settings of choice
 
Merge the wordart and dropshadow
 
Place your main tube in the center
Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bat
Cupcake
Ghost
Ghosts
Kitty
Scythe
Spider
Witch Shoe

Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 14,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Hallow Night - CC Exclusive FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
No artist tube used
FTU Exclusive Scrap Kit by Jen from Sweets Temptations
You can download this awesome kit HERE
Template# 3 from Melissa which can be downloaded HERE
Exclusive mask from Vesta which can be downloaded HERE
Don't forget to leave a thank you when downloading
Ok Lets get Started:

Open template - Shift D to duplicate then close out original
deleted copyright & dotted lines
we will working from the bottom up
 
Click on merged layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on second merged layer selections,select all, float,defloat
add solid color of choice
add noise with settings of choice
selection invert delete
select none delete the original
 
Click on third merged layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on fourth merged layer selections,select all, float,defloat
add a new layer and flood fill with white
add noise with settings of choice
selection invert delete
select none delete the original
 
Click on fifth merged layer selections,select all, float,defloat
add a new layer and flood fill with solid color
add noise with settings of choice
selection invert delete
select none delete the original
 
Click on sixth merged layer & add noise
Add noise to the stars layer
 
Now lets add our elements
I used the following:
Bats
Books
Candy Pumpkin
Coffin
Cupcake
Ghost
Both Grims
Haunted House
Kitty
owl
Tree 2
Winged Skull
 
Merge your layers
Add mask of choice
 
Place your name where you like it
Resize to your liking and save as PNG
This tutorial was created on October 19,2012 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Ready for Christmas - FTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Ismael Rac
Which you must obtain a license to use at his store HERE
FTU Scrap Kit by Jen from Sweet Temptations called "Christmas Candy"
You can download this awesome kit HERE
Template by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 90% all layers
Canvas size 700x700
delete copyright, rasters 5,8&9
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
add new layer & flood fill with solid color
select none delete the original
 
Click on raster 7 selections,select all, float,defloat
add new layer & flood fill with another solid color
select none delete the original
 
Click on the wordart & apply color or gradient of choice
add noise and glow
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bow
Box 1
Candycane 1
Cupcake 1
Flowers 1
Frame 1
Gifts 1,2&3
Ginger
Lollipop 4
Mug
Tree
 
Merge your layers
Open paper 2 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 18, 2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sweet as Honey - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has closed
You can now purchase his tubes at his store HERE
PTU Scrap Kit from Pimp'd Designz called "Sweeter Than Honey"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Mask of choice
 
Resize your elements to your liking
 
Ok Lets get Started:
Open blank canvas 700x700
Open frame 3 and place in center
Click inside frame with magic wand
Selections modify expand by 4
Open paper 12 & paste as new layer
Selections invert delete
Move paper under frame
 
Place your main tube where desired
Xero Radiance with settings of choice
 
Now add any other elements you want to your tag
I used:
Bee
Bee Hive
Flower 4
Greenery
Honey Drips
Honey Jar
Honey Wand
Print 2
Ribbon 1&2
 
Merge your layers
Open paper 5 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 18,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Beauty of Fall - PTU

 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
You must obtain a license to use at CDO HERE
PTU Scrap Collab Kit from Designs by Sarah called "Fall Fantasy"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Template #48 by TwyztedT's Playroom HERE
Mask of choice
 
Plugins Used:
Xero Radiance
Toadies Band Suppress Noise
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 90%
Canvas size 700x700
delete copyright, raster 5,copy of raster 5 & dotted circle
 
Apply Toadies band Suppress Noise to the frames
 
Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on raster 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Repeat for copy of raster 4
 
Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
 
Click on raster 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Branch
Butterfly
Dragonfly
Elk
Flower 1
Leaf 1,3,4,5
Leaves 1&2
Mushrooms 2&3
Plant 1,2,3
Ribbon 2
Sparkles 2
 
Merge your layers
Open paper 5 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on August 18,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png